Prompt & Done · CADBOX pack
Claude designs a printable part. Here's the install command and the prompt.
text-to-cad is an open-source (MIT) plugin that lets Claude design parts and export STEP and STL files. You need Claude Code and uv.
1 Install (Claude Code)
claude plugin marketplace add earthtojake/text-to-cad#latest
claude plugin install text-to-cad@earthtojakeTelemetry is on by default: turn it off with uvx cadgen telemetry off.
2 The prompt from the reel
Design a 3D-printable hinged storage box for earbuds: outer 70 x 50 x 28 mm, 2 mm walls, a lid attached by a print-in-place pin hinge along the back edge (0.4 mm clearance), a snap-fit latch at the front, rounded 3 mm corners, and two internal compartments. Export STEP and STL, check it is a valid solid, and render a snapshot. Keep all dimensions as named parameters in the source.Then ask for a change:
Edit the same box: make it 20% taller and add a thumb notch on the front edge of the lid.3 Honest notes
- Tested 26 Oct 2026 with Claude Code 2.1.310 (Sonnet) and text-to-cad 0.7.26. First run 1 min 52 s, the edit 23 s.
- Our trimesh check found 6 open edges at the hinge in the edited export; Claude found the cause and fixed it, and the final STL and both bodies are watertight.
- Not test-printed: latch flex and hinge clearance are untested. Tune for your filament and printer.